For Maytag
Page 2
BEARING KITS FOR THE NEW MAYTAG
On the new Maytag front loaders made by Primus we have kits made up to make the replacement of bearings and seals easier.
The 18 lb machine usually needs a shaft saver
kit that costs $146.
The 25 lb Front loader costs $138 without shaft saver.
The 35 lb costs $158
SHAFT SAVER KIT FOR MAYTAG WASHER
When your bearings go chances are the shaft is worn, 99% of the time it is and you can't reuse the basket and shaft, With the E-Z Way kit your worries are over. Each kit contains new seals, bearings, shaft saver, helper tools, complete instructions and everything you need
to do a perfect job, save thousands.
18 lb Front loader: $117
25 lb: $216.
35 lb Front loader: $329 50 lb: $369.
BEARING & SEAL KITS ONLY
35 lb Front loader: $230 50 lb: $218.
WHEN YOUR MAYTAG WON'T HOLD WATER
We got generic drain valves to save you lots of money, you drill the mounting holes and save big bucks. Specify 115 or 220 volts.
Made to fit 2-1/2": $49 Made to fit 3": $73
NOTE: There is keyway trouble in pulleys, cement yours on with 5 Minute epoxy also if small bearing end is worn we fix that too.