For Wascomat
Page 3
FIX IT KIT FOR JUNKIE COIN MECH
Well they don't make them like they used to, after awhile the shaft gets loose as a goose and control of the switches gets almost impossible. E-Z Way has developed
A kit that restores it like new again, fix it in about 5 minutes with no effort or brains. Special kit has parts to stop slop and you're back in business with hardly any effort.
Be surprised, Enough to fix two Mechs: $18
DON'T LET COIN CHUTES CHEAT YOU
Many people are losing money because they don't know that their washers are working for less money. Service your chutes at least once a year.
TESTING MOTOR OR RELAY
If your motor won't spin or the motor won't wash you must first test for bad bearings, then test each motor by pushing down on each relay with a pencil end, if the motor washes but won't spin, the problem is caused by a clogged drain valve damaging the thermal overload inside the motor. You can next cut the purple wires as shown above and join the wires that come from the top bypassing the overload after you fix drain problem.